VNQ810-E
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Auto Restart, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 6.25W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 13V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VNQ810 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 3.5A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 5mA |
| Output Configuration | High Side |
| Power Dissipation | 6.25W |
| Output Current | 3.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 5A |
| Rds On (Typ) | 160m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height | 2.35mm |
| Length | 18.1mm |
| Width | 7.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
VNQ810-E Overview
It's?packaged?in?the way?of?a?Tube.In the 28-SOIC (0.295, 7.50mm Width) package, it is included.The lighting driver is mounted in the Surface Mount position.It owns the General Purpose switch type.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.As a default, the output is set to 4.To operate, it needs a supply voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.It has a total of Auto Restart, Status Flag features.It belongs to the family VNQ810.It contains 28 terminations.For operation, 28 pins are used.There are 4 functions of the LED driver.It is necessary to reduce the maximum output current to 3.5A to meet the operation criteria.The supply voltage of 13V is conducive to high efficiency.It is mounted in the way of Surface Mount.There are 28 pins in total on this board.When this is the case, the output current is set to 3.5A.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.A maximum supply voltage of 36V is set in Vsup.There is a voltage supply of 8/36V volts on this part.Optimal efficiency requires a voltage of 13V.
VNQ810-E Features
Supplied from 13V
VNQ810-E Applications
There are a lot of STMicroelectronics VNQ810-E Power Switches ICs applications.
- Wearable Devices
- USB Power Distribution
- Wireless Headsets
- PC Card Hot Swap
- PC Cards
- Portable/Handheld Devices
- Smart Phones, Feature Phones
- Portable GPS
- Portable GPS Device
- Notebook and Tablet Computers
