VNQ81013TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 6.25mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 13V |
| Terminal Pitch | 1.27mm |
| Base Part Number | VNQ810 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 3.5A |
| Operating Supply Voltage | 41V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 13V |
| Interface | On/Off |
| Nominal Supply Current | 40mA |
| Output Configuration | High Side |
| Power Dissipation | 6.25mW |
| Output Current | 3.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 5A |
| Rds On (Typ) | 160m Ω (Max) |
| Drain to Source Resistance | 320mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Length | 17.9mm |
| Width | 7.5mm |
| Thickness | 2.65mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
VNQ81013TR Overview
It is packaged in the manner of a Tape & Reel (TR).There is a package for it in the 28-SOIC (0.295, 7.50mm Width) package.The lighting driver has the mounting type Surface Mount.General Purpose is the switch type it owns.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.The lighting driver has a total of 4 outputs that are available for use.Operation is based on a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.There are Auto Restart, Status Flag features available on the LED driving board.It belongs to the family VNQ810.It consists of 28 terminations in total.For operation, 28 pins are used.There are 2 functions of the LED driver.To comply with the operation criteria, the maximum output current is reduced to 3.5A.The supply voltage can be 13V for high efficiency.This lighting driver is mounted in the way of Surface Mount.The LED driving board is equipped with a total of 28 pins.The output current is set to 3.5A in this case.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.The maximum supply voltage is set to 36V.13V is the power supply of the part.It is recommended to set the supply voltage to 41V for optimum efficiency.
VNQ81013TR Features
Supplied from 13V
VNQ81013TR Applications
There are a lot of STMicroelectronics VNQ81013TR Power Switches ICs applications.
- Hot Swap
- PC Card Hot Swap
- USB3.1 Power Delivery
- Hard Disk Drives
- Set-top-box
- USB Protection
- Wireless Modem Data Cards
- Wireless/Networking Cards
- Smart Phones, Feature Phones
- Wearable Devices
