VNQ810M
| Parameters | |
|---|---|
| Rds On (Typ) | 150m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 6.25W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 13V |
| Terminal Pitch | 1.27mm |
| Base Part Number | VNQ810 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 700mA |
| Operating Supply Voltage | 41V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 13V |
| Interface | On/Off |
| Nominal Supply Current | 12μA |
| Output Configuration | High Side |
| Power Dissipation | 6.25W |
| Output Current | 900mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 0.9A |
VNQ810M Overview
As a result, it is packaged in the form of a Tube.This package is included in 28-SOIC (0.295, 7.50mm Width).Mounting type Surface Mount is selected for the LED driving board.The switch type of this switch is General Purpose.To ensure reliable operation, set the temperature to -40°C~150°C TJ.There are 4 outputs available on this lighting driver.The LED driving board operates at Not Required volts.It has a maximum output voltage of N-Channel volts.Features of the lighting driver are Auto Restart, Status Flag.The VNQ810 family contains this object.The termination count is 28.The 28 pins are used for the operation of the system.It is important to note that the LED driving board has 2 functions.This results in the maximum output current dropping to 700mA to meet the operation criteria.Supply voltages of 13V allow for high efficiency.As a result, it is mounted in the manner of Surface Mount.The LED driver has a total of 28 pins.When this is the case, the output current is set to 900mA.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.The lighting driver is configured to have a maximum supply voltage of 36V (Vsup).There is a voltage supply of 13V volts on this part.In order to optimize the efficiency of the supply voltage, it should be set to 41V.
VNQ810M Features
Supplied from 13V
VNQ810M Applications
There are a lot of STMicroelectronics VNQ810M Power Switches ICs applications.
- Storage Drives
- Notebook and Tablet Computers
- Portable Music Players
- USB3.1 Power Delivery
- Portable/Handheld Devices
- PC Cards
- Wireless/Networking Cards
- Gaming
- Wireless Modem Data Cards
- Handheld Devices
