VNQ810M-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 150mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 6.25W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 13V |
| Terminal Pitch | 1.27mm |
| Base Part Number | VNQ810 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 900mA |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Current - Output (Max) | 700mA |
| Nominal Supply Current | 12μA |
| Output Configuration | High Side |
| Power Dissipation | 6.25W |
| Output Current | 600mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 0.9A |
| Rds On (Typ) | 150m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height | 2.35mm |
| Length | 18.1mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNQ810M-E Overview
Tube is how it's packaged.This file is included in package 28-SOIC (0.295, 7.50mm Width).The lighting driver has the mounting type Surface Mount.The switch type is General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.As a default, the output is set to 4.A supply voltage of Not Required is required for it to operate.It has a maximum output voltage of N-Channel volts.In terms of features, the LED driving board has Auto Restart, Status Flag.As you can see, it comes from the VNQ810 family.The termination count is 28.For operation, 28 pins are used.There are 4 functions of the LED driver.Its maximum output voltage is 700mAV.To comply with the operation criteria, the maximum output current is reduced to 900mA.A supply voltage of 13V leads to high efficiency.The LED driving board is mounted in the way of Surface Mount.The LED driver has a total of 28 pins.In this LED driving board, there is 150mOhm resistance.This case results in a 600mA output current.It is self-contained in an econtainer with a capacity of Peripheral Drivers.The maximum supply voltage for this LED driver is 36V (Vsup).It has a power supply of 8/36V.A supply voltage of 13V is recommended for maximum efficiency.
VNQ810M-E Features
Supplied from 13V
Resistance of 150mOhm
VNQ810M-E Applications
There are a lot of STMicroelectronics VNQ810M-E Power Switches ICs applications.
- USB Ports/Hubs
- Portable/Handheld Devices
- Portable Video Game Players
- Gaming
- Portable Devices
- Wearable Devices
- Set-top-box
- HDD and SSD
- Wireless Headsets
- Portable GPS
