VNQ810M13TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 150mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 6.25W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 13V |
| Terminal Pitch | 1.27mm |
| Base Part Number | VNQ810 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 900mA |
| Operating Supply Voltage | 41V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 13V |
| Interface | On/Off |
| Current - Output (Max) | 700mA |
| Nominal Supply Current | 12μA |
| Output Configuration | High Side |
| Power Dissipation | 6.25W |
| Output Current | 900mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 0.9A |
| Rds On (Typ) | 150m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VNQ810M13TR Overview
As a result, it is packaged in the form of a Tape & Reel (TR).There is a package for it in the 28-SOIC (0.295, 7.50mm Width) package.The LED driver is mounted as Surface Mount.It owns the General Purpose switch type.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.By default, it is set to output 4.With a supply voltage of Not Required, the LED driving board operates.The maximum output voltage of this LED driver is N-Channel volts.Features of the lighting driver are Auto Restart, Status Flag.It is part of the VNQ810 family of LED drivers.In total, there are 28 terminations.In order to operate, the 28 pins are used.The LED driver has 2 functions.There is a maximum output of 700mAV from the LED driver.The maximum output current drops to 900mA in order to meet the operation criteria.With a supply voltage of 13V, high efficiency is possible.As a result, it is mounted in the manner of Surface Mount.In total, it has 28 pins.It has 150mOhm resistance.When this case is used, the output current is set to 900mA.It is self-contained in an econtainer with a capacity of Peripheral Drivers.The LED driver is configured with a maximum supply voltage of 36V (Vsup).It has a power supply of 13V.When using this LED driving board, it is recommended that the supply voltage is set to 41V.
VNQ810M13TR Features
Supplied from 13V
Resistance of 150mOhm
VNQ810M13TR Applications
There are a lot of STMicroelectronics VNQ810M13TR Power Switches ICs applications.
- Notebook PC
- Hot Swap
- Set-top-box
- Portable GPS
- Portable Music Players
- PC Card Hot Swap
- Solid-State Drives
- Portable GPS Device
- Smartphone and PDA
- Portable Video Game Players
