VNQ810MTR-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 150mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 6.25W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 4 |
| Supply Voltage | 13V |
| Terminal Pitch | 1.27mm |
| Base Part Number | VNQ810 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 900mA |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Current - Output (Max) | 700mA |
| Nominal Supply Current | 12μA |
| Output Configuration | High Side |
| Power Dissipation | 6.25W |
| Output Current | 600mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 0.9A |
| Rds On (Typ) | 150m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNQ810MTR-E Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).The 28-SOIC (0.295, 7.50mm Width) package contains it.Mounting type Surface Mount is selected for the LED driving board.The switch type is General Purpose.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.The lighting driver is equipped with 4 outputs that can be used.To operate, it needs a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.Currently, the LED driving board is equipped with Auto Restart, Status Flag features.There is a VNQ810 family of things that it belongs to.There are 28 terminations in it.In order to operate, 28 pins are used.It has 4 functions.The LED driver output is limited to 700mAV.In order to meet the operation criteria, the maximum output current drops to 900mA.A supply voltage of 13V leads to high efficiency.This lighting driver is mounted in the way of Surface Mount.A total of 28 pins are included in this LED driver.150mOhm is the resistance of the lighting driver.This results in a 600mA output current.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.This LED driver is configured to have a maximum supply voltage of 36V (Vsup).This part's power supply is 8/36V.In order to optimize the efficiency of the supply voltage, it should be set to 13V.
VNQ810MTR-E Features
Supplied from 13V
Resistance of 150mOhm
VNQ810MTR-E Applications
There are a lot of STMicroelectronics VNQ810MTR-E Power Switches ICs applications.
- Hot-Swap Systems
- Smartphone and PDA
- Wireless Headsets
- Notebook and Tablet Computers
- Portable GPS Device
- Portable Devices
- Hot Swap
- Handheld Devices
- Wireless Modem Data Cards
- Hot Swap
