Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
28-SOIC (0.295, 7.50mm Width) |
Number of Pins |
28 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Series |
VIPower™ |
Feature |
Auto Restart, Status Flag |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
ECCN Code |
EAR99 |
Resistance |
160mOhm |
Max Power Dissipation |
6.25W |
Base Part Number |
VNQ810 |
Output Type |
N-Channel |
Max Output Current |
3.5A |
Interface |
On/Off |
Nominal Supply Current |
12μA |
Output Configuration |
High Side |
Power Dissipation |
6.25W |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
7mA |
Input Type |
Non-Inverting |
Turn On Delay Time |
30 μs |
Switch Type |
General Purpose |
Output Current per Channel |
3.5A |
Nominal Input Voltage |
13V |
Turn-Off Delay Time |
30 μs |
Ratio - Input:Output |
1:1 |
Voltage - Load |
5.5V~36V |
Fault Protection |
Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
Number of Drivers |
4 |
Rds On (Typ) |
160m Ω (Max) |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
VNQ810P-E Overview
The LED driver's packaged as a Tube.In the 28-SOIC (0.295, 7.50mm Width) package, it is included.This lighting drivere has a mounting type of Surface Mount.There is a General Purpose switch type associated with it.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.A supply voltage of Not Required is required for it to operate.There is a maximum output voltage of N-Channel volts on this LED driver.In terms of features, the LED driving board has Auto Restart, Status Flag.There is a VNQ810 family of things that it belongs to.It is necessary to use the 28 pins in order to operate the LED driver.To comply with the operation criteria, the maximum output current is reduced to 3.5A.Surface Mount is mounted in the way.In this case, there is 160mOhm resistance in the LED driving board.These electrical components are part of the VIPower? series.It requires a maximum current requirement of 7mA.The part has 4 drivers.
VNQ810P-E Features
Resistance of 160mOhm
VNQ810P-E Applications
There are a lot of STMicroelectronics VNQ810P-E Power Switches ICs applications.
- USB Power Distribution
- Smart Phones, Feature Phones
- Hard Disk Drives
- Various applications equipped with buttons
- Portable/Handheld Devices
- Storage Drives
- Storage (HDDs, SSDs)
- USB Protection
- Smartphone and PDA
- HDD, SSD