VNQ810PEP-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerBSOP (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 160mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 66W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VNQ810 |
| Pin Count | 24 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 5A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 13.5mA |
| Output Configuration | High Side |
| Power Dissipation | 66W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 13.5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 3.5A |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 7.5A |
| Rds On (Typ) | 160m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNQ810PEP-E Overview
As a result, it is packaged in the form of a Tube.There is a package for it in the 24-PowerBSOP (0.295, 7.50mm Width) package.The lighting driver has the mounting type Surface Mount.It owns General Purpose switch type.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.The LED driver has 4 outputs.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts can be obtained with this LED driver.As far as features are concerned, the LED driving board has Auto Restart, Status Flag.It is part of the VNQ810 family of LED drivers.It has a total of 24 terminations.It is necessary to use the 24 pins in order to operate the LED driver.There are 4 functions of the LED driver.In order to meet the operation criteria, the maximum output current drops to 5A.The supply voltage of 13V is conducive to high efficiency.Surface Mount is mounted in the way of this lighting driver.A total of 24 pins are present on it.It has 160mOhm resistance.It is part of the VIPower? series.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.Vsup (maximum supply voltage) is set to 36V.In this case, the power supply is 8/36V.A supply voltage of 13V is recommended for maximum efficiency.A maximum current requirement of 13.5mA is required for its operation.
VNQ810PEP-E Features
Supplied from 13V
Resistance of 160mOhm
VNQ810PEP-E Applications
There are a lot of STMicroelectronics VNQ810PEP-E Power Switches ICs applications.
- Portable GPS
- PC Card Hot Swap
- Low Voltage I/O System Power
- Portable GPS Device
- Hot Swap
- Various applications equipped with buttons
- Hot Swaps
- Hard Disk Drives
- USB Ports/Hubs
- USB Power Distribution
