Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-PowerBSOP (0.295, 7.50mm Width) |
Number of Pins |
24 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
Series |
VIPower™ |
JESD-609 Code |
e3 |
Feature |
Auto Restart, Status Flag |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
ECCN Code |
EAR99 |
Resistance |
160mOhm |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Peripheral Drivers |
Max Power Dissipation |
66W |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
13V |
Terminal Pitch |
0.8mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
VNQ810 |
Pin Count |
24 |
Number of Outputs |
4 |
Output Type |
N-Channel |
Max Output Current |
5A |
Operating Supply Voltage |
13V |
Supply Voltage-Max (Vsup) |
36V |
Power Supplies |
8/36V |
Interface |
On/Off |
Nominal Supply Current |
13.5mA |
Output Configuration |
High Side |
Power Dissipation |
66W |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
13.5mA |
Input Type |
Non-Inverting |
Turn On Delay Time |
30 μs |
Switch Type |
General Purpose |
Output Current per Channel |
3.5A |
Turn-Off Delay Time |
30 μs |
Ratio - Input:Output |
1:1 |
Voltage - Load |
5.5V~36V |
Driver Number of Bits |
4 |
Fault Protection |
Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
Output Peak Current Limit-Nom |
7.5A |
Rds On (Typ) |
160m Ω (Max) |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
Output Current Flow Direction |
SOURCE |
Length |
10.3mm |
Width |
7.5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
VNQ810PEPTR-E Overview
It is packaged in the form of a Tape & Reel (TR).The 24-PowerBSOP (0.295, 7.50mm Width) package includes it.It has been mounted as Surface Mount on the LED driver.General Purpose is the type of switch owned by it.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.It is possible to use 4 outputs in the lighting driver.Operation is based on Not Required supply voltage.A maximum output voltage of N-Channel volts has been specified.The lighting driver has Auto Restart, Status Flag features.It is a member of the VNQ810 family.The termination count is 24.The operation is carried out using the 24 pins.There are 4 functions of the LED driver.Maximum output current falls to 5A when operation criteria are met.High efficiency is possible when the supply voltage is set to 13V.It is mounted in the way of Surface Mount.This LED driver is equipped with a total of 24 pins.Lighting drivers with 160mOhm resistance are used.These electrical components are part of the VIPower? series.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.The maximum supply voltage is set to 36V.The power supply of the part is 8/36V.For maximum efficiency, the supply voltage should be set to 13V.It operates at a maximum current of 13.5mA.
VNQ810PEPTR-E Features
Supplied from 13V
Resistance of 160mOhm
VNQ810PEPTR-E Applications
There are a lot of STMicroelectronics VNQ810PEPTR-E Power Switches ICs applications.
- Storage (HDDs, SSDs)
- Solid State Drivers
- USB3.1 Power Delivery
- USB Power Distribution
- Portable/Handheld Devices
- Wireless/Networking Cards
- Set-Top Boxes
- Gaming
- Portable Music Players
- Telecom and Network Systems