VNQ810TR-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e4 |
| Feature | Auto Restart, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 6.25W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 4 |
| Supply Voltage | 13V |
| Terminal Pitch | 1.27mm |
| Base Part Number | VNQ810 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 3.5A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 5mA |
| Output Configuration | High Side |
| Power Dissipation | 6.25W |
| Output Current | 3.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 5A |
| Rds On (Typ) | 160m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VNQ810TR-E Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).The 28-SOIC (0.295, 7.50mm Width) package contains it.In this case, the LED driving board is mounted as Surface Mount.General Purpose is the switch type it owns.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The LED driver has 4 outputs.In order to operate, it requires a voltage supply of Not Required.The maximum output voltage of this LED driver is N-Channel volts.Currently, the LED driving board is equipped with Auto Restart, Status Flag features.I believe it belongs to the VNQ810 family.As a result, there are 28 terminations.The operation is carried out using the 28 pins.It has 4 functions.The maximum output current drops to 3.5A in order to meet the operation criteria.Using a voltage of 13V allows for high efficiency.The lighting driver is mounted in the way of Surface Mount.28 pins are equipped with it.These electrical components are part of the VIPower? series.As a result, the output current is set to 3.5A.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.This LED driver is configured to have a maximum supply voltage of 36V (Vsup).The power supply of the part is 8/36V.It is recommended to set the supply voltage to 13V for optimum efficiency.
VNQ810TR-E Features
Supplied from 13V
VNQ810TR-E Applications
There are a lot of STMicroelectronics VNQ810TR-E Power Switches ICs applications.
- Hot-Swap Systems
- Portable GPS
- Telecom and Network Systems
- Wearable Devices
- Storage (HDDs, SSDs)
- Set-top-box
- Mobile Communication Devices
- Wireless Headsets
- USB Protection
- Wireless Modem Data Cards
