banner_page

VNQ830

13V N-Channel 1.27mm PMIC VIPower? Series VNQ830 28 Pin 13V 28-SOIC (0.295, 7.50mm Width)


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-VNQ830
  • Package: 28-SOIC (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 166
  • Description: 13V N-Channel 1.27mm PMIC VIPower? Series VNQ830 28 Pin 13V 28-SOIC (0.295, 7.50mm Width) (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 28-SOIC (0.295, 7.50mm Width)
Number of Pins 28
Operating Temperature -40°C~150°C TJ
Packaging Tube
Series VIPower™
JESD-609 Code e4
Feature Auto Restart, Status Flag
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 28
ECCN Code EAR99
Resistance 65mOhm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Peripheral Drivers
Max Power Dissipation 6.25W
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 2
Supply Voltage 13V
Terminal Pitch 1.27mm
Base Part Number VNQ830
Pin Count 28
Number of Outputs 4
Output Type N-Channel
Max Output Current 9A
Supply Voltage-Max (Vsup) 36V
Power Supplies 13V
Supply Voltage-Min (Vsup) 5.5V
Interface On/Off
Current - Output (Max) 6A
Nominal Supply Current 12μA
Output Configuration High Side
Power Dissipation 6.25W
Output Current 9A
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Ratio - Input:Output 1:1
Voltage - Load 5.5V~36V
Driver Number of Bits 4
Fault Protection Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage
Output Peak Current Limit-Nom 9A
Rds On (Typ) 65m Ω (Max)
Drain to Source Resistance 130mOhm
Built-in Protections TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE
Length 17.9mm
Width 7.5mm
Thickness 2.65mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Contains Lead

VNQ830 Overview


It is package in Tube case.Package 28-SOIC (0.295, 7.50mm Width) contains it.It has been mounted as Surface Mount on the LED driver.The switch type is General Purpose.To ensure reliable operation, set the temperature to -40°C~150°C TJ.As a default, the output is set to 4.Operation is based on Not Required supply voltage.A maximum output voltage of N-Channel volts can be achieved by this LED driver.This LED driving board is equipped with Auto Restart, Status Flag features in order for it to be useful.The VNQ830 family consists of this type.In total, there are 28 terminations.During operation, the 28 pins are used.It consists of 2 functions.The lighting driver's maximum output is 6AV.It is necessary to reduce the maximum output current to 9A to meet the operation criteria.High efficiency is possible at 13V supply voltage.It is mounted in the way of Surface Mount.As a result, it has a total of 28 pins.65mOhm is the resistance of the lighting driver.The VIPower? series includes this electrical component.This case has the output current set to 9A.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.The maximum supply voltage for this lighting driver is set to 36V (Vsup).In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 5.5V.In this part, the power supply is set to 13V.

VNQ830 Features


Supplied from 13V
Resistance of 65mOhm

VNQ830 Applications


There are a lot of STMicroelectronics VNQ830 Power Switches ICs applications.

  • Wireless Modem Data Cards
  • Portable Music Players
  • Portable Video Game Players
  • Hard Disk Drives
  • Gaming
  • Notebook and Tablet Computers
  • Hot Swap
  • Wireless Headsets
  • Set-Top Boxes
  • Set-top-box

Write a review

Note: HTML is not translated!
    Bad           Good