VNQ830-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e4 |
| Feature | Auto Restart, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 6.25W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 4 |
| Supply Voltage | 13V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VNQ830 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 12μA |
| Output Configuration | High Side |
| Power Dissipation | 6.25W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 9A |
| Rds On (Typ) | 65m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height | 2.35mm |
| Length | 18.1mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
VNQ830-E Overview
As you can see, it's packaged in the way of a Tube.It's included in the 28-SOIC (0.295, 7.50mm Width) package.This lighting drivere has a mounting type of Surface Mount.It owns General Purpose switch type.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.In this LED driver, there are no outputs available.A supply voltage of Not Required is required for it to operate.A maximum output voltage of N-Channel volts can be achieved by this LED driver.In terms of features, the LED driving board has Auto Restart, Status Flag.It belongs to the family VNQ830.It consists of 28 terminations in total.The operation is performed through the 28 pins.The LED driver has 4 functions.It is necessary to reduce the maximum output current to 6A to meet the operation criteria.As long as the supply voltage is 13V, high efficiency can be achieved.As a result, it is mounted in the manner of Surface Mount.28 pins are connected to it in total.It is part of the VIPower? series.When this is the case, the output current is set to 6A.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.A maximum supply voltage of 36V is set in Vsup.This part is powered by 8/36V.For maximum efficiency, the supply voltage should be set to 13V.
VNQ830-E Features
Supplied from 13V
VNQ830-E Applications
There are a lot of STMicroelectronics VNQ830-E Power Switches ICs applications.
- Hot Swaps
- Smartphone and PDA
- Mobile Communication Devices
- Hot Swap
- Portable Devices
- Notebook PC
- Set-Top Boxes
- Portable Music Players
- Smart Phones, Feature Phones
- Portable GPS Device
