VNQ83013TR
| Parameters | |
|---|---|
| Interface | On/Off |
| Current - Output (Max) | 6A |
| Nominal Supply Current | 12μA |
| Output Configuration | High Side |
| Power Dissipation | 6.25W |
| Output Current | 9A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 9A |
| Rds On (Typ) | 65m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e4 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 65mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 6.25W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 13V |
| Terminal Pitch | 1.27mm |
| Base Part Number | VNQ830 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 9A |
| Operating Supply Voltage | 41V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 13V |
VNQ83013TR Overview
It is packaged in the manner of a Tape & Reel (TR).This package is included in 28-SOIC (0.295, 7.50mm Width).A Surface Mount mounting is used for the LED driving board.It owns General Purpose switch type.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.There are 4 outputs available on this lighting driver.It uses a supply voltage of Not Required to operate.There is a maximum output voltage of N-Channel volts.The lighting driver has Auto Restart, Status Flag features.It belongs to the VNQ830 family.The termination count is 28.The operation is carried out using the 28 pins.Currently, the lighting driver has a total of 2 functions.This lighting driver is capable of delivering a maximum output of 6A volts.In order to meet the operation criteria, the maximum output current drops to 9A.High efficiency is possible at 13V supply voltage.As a result, it is mounted in the manner of Surface Mount.The LED driving board is equipped with a total of 28 pins.Currently, the LED driving board has a resistance of 65mOhm ohms.These electrical components are part of the VIPower? series.The output current is set to 9A in this case.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.In this case, Vsup (maximum supply voltage) is set to 36V.There is a voltage supply of 13V volts on this part.Optimal efficiency requires a voltage of 41V.
VNQ83013TR Features
Supplied from 13V
Resistance of 65mOhm
VNQ83013TR Applications
There are a lot of STMicroelectronics VNQ83013TR Power Switches ICs applications.
- Hot Swap
- Portable Devices
- PDAs
- HDD, SSD
- Set-top-box
- Handheld Devices
- USB Power Distribution
- Storage Drives
- Telecom and Network Systems
- Portable Music Players
