VNQ830M
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e4 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 6.25W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 13V |
| Terminal Pitch | 1.27mm |
| Base Part Number | VNQ830 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Operating Supply Voltage | 41V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 13V |
| Interface | On/Off |
| Nominal Supply Current | 12μA |
| Output Configuration | High Side |
| Power Dissipation | 6.25W |
| Output Current | 9A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 10.5A |
| Rds On (Typ) | 60m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VNQ830M Overview
As you can see, it's packaged in the way of a Tube.The 28-SOIC (0.295, 7.50mm Width) package includes it.The lighting driver has the mounting type Surface Mount.There is a General Purpose switch type associated with it.To ensure reliable operation, set the temperature to -40°C~150°C TJ.As a default, the output is set to 4.The LED driving board operates at Not Required volts.The maximum output voltage of this LED driver is N-Channel volts.It has a total of Auto Restart, Status Flag features.It comes under the family of VNQ830.A total of 28 terminations have been found in it.In order to operate, the 28 pins are used.It is important to note that the LED driving board has 2 functions.The maximum output current must drop to 6A to meet the operation criteria.High efficiency is possible when the supply voltage is set to 13V.Surface Mount is mounted in the way of this lighting driver.A total of 28 pins are present on it.There is an electrical component included in the VIPower? series.The output current is set to 9A in this case.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.The Vsup value (maximum supply voltage) is set to 36V.This part's power supply is 13V.It is recommended to set the supply voltage to 41V for optimum efficiency.
VNQ830M Features
Supplied from 13V
VNQ830M Applications
There are a lot of STMicroelectronics VNQ830M Power Switches ICs applications.
- Low Voltage I/O System Power
- Storage (HDDs, SSDs)
- Portable/Handheld Devices
- USB Power Distribution
- PC Card Hot Swap
- Set-Top Boxes
- Hot Swap
- Wireless Headsets
- HDD and SSD
- Notebook and Tablet Computers
