VNQ830M-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e4 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 6.25W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 4 |
| Supply Voltage | 13V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VNQ830 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Interface | On/Off |
| Nominal Supply Current | 12μA |
| Output Configuration | High Side |
| Power Dissipation | 6.25W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 10.5A |
| Rds On (Typ) | 60m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height | 2.35mm |
| Length | 18.1mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VNQ830M-E Overview
As a result, it is packaged in the form of a Tube.In the 28-SOIC (0.295, 7.50mm Width) package, it is included.The LED driver is mounted as Surface Mount.It owns the General Purpose switch type.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.There is a default setting of 4 for output.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.In terms of features, the LED driving board has Auto Restart, Status Flag.The VNQ830 family consists of this type.In total, there are 28 terminations.During operation, the 28 pins are used.The LED driver has 4 functions.The maximum output current drops to 6A in order to meet the operation criteria.As long as the supply voltage is 13V, high efficiency can be achieved.Surface Mount is mounted in the way.As a result, it has a total of 28 pins.This electrical component is part of the VIPower? series.In this case, the output current is set to 6A.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.The lighting driver is configured to have a maximum supply voltage of 36V (Vsup).In order to maximize efficiency, the supply voltage should be set to 13V.
VNQ830M-E Features
Supplied from 13V
VNQ830M-E Applications
There are a lot of STMicroelectronics VNQ830M-E Power Switches ICs applications.
- Notebook and Tablet Computers
- Solid-State Drives
- Hard Disk Drives
- Portable Video Game Players
- Various applications equipped with buttons
- Gaming
- USB Protection
- HDD and SSD
- Portable GPS
- Portable Devices
