VNQ830M13TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e4 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 60mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 6.25W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 13V |
| Terminal Pitch | 1.27mm |
| Base Part Number | VNQ830 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 10.5A |
| Operating Supply Voltage | 41V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 13V |
| Interface | On/Off |
| Current - Output (Max) | 6A |
| Nominal Supply Current | 12μA |
| Output Configuration | High Side |
| Power Dissipation | 6.25W |
| Output Current | 9A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 10.5A |
| Rds On (Typ) | 60m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VNQ830M13TR Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).In the 28-SOIC (0.295, 7.50mm Width) package, it is included.Mounting type Surface Mount is selected for the LED driving board.The switch type of this switch is General Purpose.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.As a default, the output is set to 4.The LED driving board operates with a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.Currently, the LED driving board is equipped with Auto Restart, Status Flag features.This object belongs to the VNQ830 family.A total of 28 terminations have been recorded.In order to operate, the 28 pins are used.It has 2 functions.The LED driver output is limited to 6AV.The maximum output current is reduced to 10.5A to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 13V.The LED driving board is mounted in the way of Surface Mount.This LED driver is equipped with a total of 28 pins.The LED driver has 60mOhm resistance.It is included in the VIPower? series.In this case, the output current will be set to 9A.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.In this case, Vsup (maximum supply voltage) is set to 36V.This part's power supply is 13V.For maximum efficiency, the supply voltage should be set to 41V.
VNQ830M13TR Features
Supplied from 13V
Resistance of 60mOhm
VNQ830M13TR Applications
There are a lot of STMicroelectronics VNQ830M13TR Power Switches ICs applications.
- Various applications equipped with buttons
- Solid-State Drives
- USB3.1 Power Delivery
- USB Ports/Hubs
- Smart Phones, Feature Phones
- Smartphone and PDA
- Hot Swaps
- Portable Video Game Players
- Telecom and Network Systems
- USB Protection
