VNQ830MTR-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e4 |
| Feature | Auto Restart, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 60mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 6.25W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 13V |
| Terminal Pitch | 1.27mm |
| Base Part Number | VNQ830 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 10.5A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Interface | On/Off |
| Nominal Supply Current | 12μA |
| Output Configuration | High Side |
| Power Dissipation | 6.25W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 10.5A |
| Rds On (Typ) | 60m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VNQ830MTR-E Overview
It is packaged in the form of a Tape & Reel (TR).The 28-SOIC (0.295, 7.50mm Width) package includes it.In this case, the LED driving board is mounted as Surface Mount.General Purpose is the type of switch owned by it.To ensure reliable operation, set the temperature to -40°C~150°C TJ.It is possible to use 4 outputs in the lighting driver.To operate, it needs a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.This LED driving board is equipped with Auto Restart, Status Flag features in order for it to be useful.The VNQ830 family contains this object.A total of 28 terminations can be found in it.The operation is carried out using the 28 pins.It consists of 4 functions.As a result, the maximum output current is reduced to 10.5A in order to meet the operation requirements.Using a voltage of 13V allows for high efficiency.This lighting driver is mounted in the way of Surface Mount.In total, it has 28 pins.In this LED driving board, there is 60mOhm resistance.It is included in the VIPower? series.When this is the case, the output current is set to 6A.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.The maximum supply voltage for this lighting driver is set to 36V (Vsup).In order to maximize efficiency, the supply voltage should be set at 13V.
VNQ830MTR-E Features
Supplied from 13V
Resistance of 60mOhm
VNQ830MTR-E Applications
There are a lot of STMicroelectronics VNQ830MTR-E Power Switches ICs applications.
- Low Voltage I/O System Power
- HDD, SSD
- USB Power Distribution
- Smart Phones, Feature Phones
- Storage (HDDs, SSDs)
- Portable Video Game Players
- USB Power Distribution
- Smartphone and PDA
- Storage Drives
- Wireless Modem Data Cards
