VNQ830P-E
| Parameters | |
|---|---|
| Switch Type | General Purpose |
| Nominal Input Voltage | 13V |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 9A |
| Rds On (Typ) | 65m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | NRND (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e4 |
| Feature | Auto Restart, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 6.25W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 4 |
| Supply Voltage | 13V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VNQ830 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 5mA |
| Output Configuration | High Side |
| Power Dissipation | 6.25W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 μs |
VNQ830P-E Overview
Tube is how it's packaged.The 28-SOIC (0.295, 7.50mm Width) package contains it.In this case, the LED driving board is mounted as Surface Mount.This switch is of type General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.There are 4 outputs available on this lighting driver.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.This LED driving board is equipped with Auto Restart, Status Flag features in order for it to be useful.The VNQ830 family consists of this type.There are 28 terminations in it.The operation is performed through the 28 pins.As far as the lighting driver is concerned, there are 4 functions.As a result, the maximum output current is reduced to 6A in order to meet the operation requirements.The supply voltage of 13V is conducive to high efficiency.It is positioned in the direction of Surface Mount.A total of 28 pins are present on it.A component of this type is included in the VIPower? series.In this case, the output current is set to 6A.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.The maximum supply voltage for this LED driver is 36V (Vsup).This part is powered by 8/36V.When using this LED driving board, it is recommended that the supply voltage is set to 13V.
VNQ830P-E Features
Supplied from 13V
VNQ830P-E Applications
There are a lot of STMicroelectronics VNQ830P-E Power Switches ICs applications.
- USB3.1 Power Delivery
- Portable Devices
- Wearable Devices
- PDAs
- Storage (HDDs, SSDs)
- Low Voltage I/O System Power
- Smartphone and PDA
- Storage Drives
- Solid-State Drives
- PC Cards
