VNQ830PEP-E
| Parameters | |
|---|---|
| Rds On (Typ) | 60m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 2.22mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerBSOP (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 65mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 83W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VNQ830 |
| Pin Count | 24 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 18A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Current - Output (Max) | 14A |
| Nominal Supply Current | 13.5mA |
| Output Configuration | High Side |
| Power Dissipation | 83W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 13.5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 18A |
VNQ830PEP-E Overview
It is packaged in the form of a Tube.The 24-PowerBSOP (0.295, 7.50mm Width) package contains it.Surface Mount is the mounting type of the LED driver.The switch type is General Purpose.To ensure reliable operation, set the temperature to -40°C~150°C TJ.By default, it is set to output 4.It uses a supply voltage of Not Required to operate.The maximum output voltage is N-Channel volts.The lighting driver has Auto Restart, Status Flag features.It comes under the family of VNQ830.A total of 24 terminations have been recorded.The operation is carried out using the 24 pins.It contains 4 functions.There is a maximum output of 14AV from the LED driver.Maximum output current falls to 18A when operation criteria are met.High efficiency is possible when the supply voltage is set to 13V.The lighting driver is mounted in the way of Surface Mount.It is equipped with a total of 24 pins.Currently, the LED driving board has 65mOhm resistance.This electrical component is included in the VIPower? series.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.The maximum supply voltage for this lighting driver is set to 36V (Vsup).This part is powered by 8/36V.The supply voltage should be set at 13V for best efficiency.13.5mA is the maximum current required to operate it.
VNQ830PEP-E Features
Supplied from 13V
Resistance of 65mOhm
VNQ830PEP-E Applications
There are a lot of STMicroelectronics VNQ830PEP-E Power Switches ICs applications.
- Portable/Handheld Devices
- Set-top-box
- Smartphone and PDA
- Hot Swap
- Handheld Devices
- Various applications equipped with buttons
- Wireless Headsets
- Gaming
- Telecom and Network Systems
- Mobile Communication Devices
