VNQ830PEPTR-E
| Parameters | |
|---|---|
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 2.22mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerBSOP (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 65mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 83W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VNQ830 |
| Pin Count | 24 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 18A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Current - Output (Max) | 14A |
| Nominal Supply Current | 13.5mA |
| Output Configuration | High Side |
| Power Dissipation | 83W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 13.5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 18A |
| Rds On (Typ) | 60m Ω (Max) |
VNQ830PEPTR-E Overview
As a result, it is packaged in the form of a Tape & Reel (TR).It is included with the 24-PowerBSOP (0.295, 7.50mm Width) package as well.Surface Mount is the mounting type of the LED driver.The switch type is General Purpose.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.As a default, the output is set to 4.A supply voltage of Not Required is required for it to operate.Voltage output is N-Channel volts at maximum.The lighting driver has Auto Restart, Status Flag features.It is a member of the VNQ830 family.It consists of 24 terminations in total.The operation is performed through the 24 pins.It is important to note that the LED driving board has 4 functions.This LED driver has a maximum output of 14AV.This operation requires the maximum output current to be decreased to 18A.It is possible to obtain high efficiency with a supply voltage of 13V.The lighting driver is mounted in the way of Surface Mount.24 pins are connected to it in total.The LED driver has 65mOhm resistance.It is part of the VIPower? series.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.The Vsup value (maximum supply voltage) is set to 36V.This part is powered by 8/36V.The supply voltage should be set at 13V for best efficiency.There is a maximum current requirement of 13.5mA for its operation.
VNQ830PEPTR-E Features
Supplied from 13V
Resistance of 65mOhm
VNQ830PEPTR-E Applications
There are a lot of STMicroelectronics VNQ830PEPTR-E Power Switches ICs applications.
- HDD, SSD
- Storage Drives
- PC Cards
- Hot-Swap Systems
- USB3.1 Power Delivery
- Wireless Headsets
- Notebook PC
- Various applications equipped with buttons
- Gaming
- Set-top-box
