VNQ830PTR-E
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e4 |
| Feature | Auto Restart, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 65mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 6.25W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 13V |
| Terminal Pitch | 1.27mm |
| Base Part Number | VNQ830 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 9A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 5mA |
| Output Configuration | High Side |
| Power Dissipation | 6.25W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 9A |
| Rds On (Typ) | 65m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNQ830PTR-E Overview
Tape & Reel (TR) is the way it's packaged.It is included with the 28-SOIC (0.295, 7.50mm Width) package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is General Purpose.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.There are 4 outputs available on this lighting driver.In order to operate, it requires a voltage supply of Not Required.The maximum output voltage of this LED driver is N-Channel volts.The lighting driver has Auto Restart, Status Flag features.It belongs to the VNQ830 family.A total of 28 terminations have been found in it.The operation is performed through the 28 pins.It is important to note that the LED driving board has 4 functions.The maximum output current must drop to 9A to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 13V.Surface Mount is mounted in the way of this LED driving board.There are 28 pins in total on this board.The LED driver has 65mOhm resistance.There is an electrical component included in the VIPower? series.As a result, the output current is set to 6A.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.The LED driver is configured with a maximum supply voltage of 36V (Vsup).The power supply of the part is 8/36V.In order to optimize the efficiency of the supply voltage, it should be set to 13V.
VNQ830PTR-E Features
Supplied from 13V
Resistance of 65mOhm
VNQ830PTR-E Applications
There are a lot of STMicroelectronics VNQ830PTR-E Power Switches ICs applications.
- USB Ports/Hubs
- USB Power Distribution
- HDD and SSD
- Handheld Devices
- PC Cards
- Smart Phones, Feature Phones
- Solid State Drivers
- Set-Top Boxes
- Wearable Devices
- USB Power Distribution
