VNQ830TR-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e4 |
| Feature | Auto Restart, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 6.25W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 4 |
| Supply Voltage | 13V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VNQ830 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 12μA |
| Output Configuration | High Side |
| Power Dissipation | 6.25W |
| Output Current | 9A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 9A |
| Rds On (Typ) | 60m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
VNQ830TR-E Overview
It is package in Tape & Reel (TR) case.There is a package for it in the 28-SOIC (0.295, 7.50mm Width) package.This LED driving board is mounted using the mounting type Surface Mount.A General Purpose switch type is owned by it.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The LED driver has a total of 4 outputs.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.As far as features are concerned, the LED driving board has Auto Restart, Status Flag.This object belongs to the VNQ830 family.It has a total of 28 terminations.For operation, 28 pins are used.It consists of 4 functions.This results in the maximum output current dropping to 6A to meet the operation criteria.Supply voltages of 13V allow for high efficiency.This lighting driver is mounted in the way of Surface Mount.It is equipped with a total of 28 pins.This electrical component is part of the VIPower? series.When this is the case, the output current is set to 9A.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.The maximum supply voltage is set to 36V.In this case, the power supply is 8/36V.The supply voltage should be set at 13V for best efficiency.
VNQ830TR-E Features
Supplied from 13V
VNQ830TR-E Applications
There are a lot of STMicroelectronics VNQ830TR-E Power Switches ICs applications.
- Solid-State Drives
- Hot Swap
- Various applications equipped with buttons
- Hot Swaps
- USB Protection
- Low Voltage I/O System Power
- Storage (HDDs, SSDs)
- PC Card Hot Swap
- USB Power Distribution
- USB3.1 Power Delivery
