VNQ860
| Parameters | |
|---|---|
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 0.7A |
| Rds On (Typ) | 270m Ω (Max) |
| Drain to Source Resistance | 540mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e4 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 270mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Voltage - Rated DC | 36V |
| Max Power Dissipation | 16W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Terminal Pitch | 1.27mm |
| Base Part Number | VNQ860 |
| Pin Count | 20 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 700mA |
| Operating Supply Voltage | 41V |
| Interface | On/Off |
| Nominal Supply Current | 120mA |
| Output Configuration | High Side |
| Power Dissipation | 16W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 250mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
VNQ860 Overview
Tube is the way it's packaged.The 20-SOIC (0.295, 7.50mm Width) package contains it.The lighting driver has the mounting type Surface Mount.It owns the General Purpose switch type.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The LED driver is equipped with 4 outputs.With a supply voltage of Not Required, the LED driving board operates.The maximum output voltage is N-Channel volts.There are Auto Restart, Status Flag features available on the LED driving board.The VNQ860 family consists of this type.The termination count is 20.It is necessary to use the 20 pins in order to operate the LED driver.The LED driver has 1 functions.To meet the operation criteria, the maximum output current drops to 700mA.High efficiency is possible at 24V supply voltage.In this case, it is mounted in the way of Surface Mount.20 pins are connected to it in total.In this LED driving board, there is 270mOhm resistance.The VIPower? series includes this electrical component.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.In order to maximize efficiency, the supply voltage should be set at 41V.
VNQ860 Features
Supplied from 24V
Resistance of 270mOhm
VNQ860 Applications
There are a lot of STMicroelectronics VNQ860 Power Switches ICs applications.
- USB3.1 Power Delivery
- PC Cards
- Portable Music Players
- Gaming
- Hot Swap
- USB Power Distribution
- USB Ports/Hubs
- Wireless Modem Data Cards
- Notebook and Tablet Computers
- Handheld Devices
