Parameters |
Interface |
On/Off |
Nominal Supply Current |
70μA |
Output Configuration |
High Side |
Power Dissipation |
16W |
Output Current |
250mA |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Turn On Delay Time |
10 μs |
Switch Type |
General Purpose |
Output Current per Channel |
250mA |
Drain to Source Voltage (Vdss) |
41V |
Turn-Off Delay Time |
40 μs |
Collector Emitter Voltage (VCEO) |
36V |
Max Collector Current |
250mA |
Continuous Drain Current (ID) |
250mA |
Ratio - Input:Output |
1:1 |
Voltage - Load |
5.5V~36V |
Fault Protection |
Current Limiting (Fixed), Over Temperature, Over Voltage |
Number of Drivers |
4 |
Output Peak Current Limit-Nom |
0.7A |
Rds On (Typ) |
270m Ω (Max) |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
Height |
2.35mm |
Length |
13mm |
Width |
7.6mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 7 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.295, 7.50mm Width) |
Number of Pins |
20 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Series |
VIPower™ |
JESD-609 Code |
e3 |
Feature |
Auto Restart, Status Flag |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Resistance |
270mOhm |
Terminal Finish |
Matte Tin (Sn) - annealed |
Subcategory |
Peripheral Drivers |
Max Power Dissipation |
16W |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
24V |
Terminal Pitch |
1.27mm |
Base Part Number |
VNQ860 |
Pin Count |
20 |
Output Type |
N-Channel |
Max Output Current |
700mA |
Supply Voltage-Min (Vsup) |
5.5V |
VNQ860-E Overview
Tube is how it's packaged.In the 20-SOIC (0.295, 7.50mm Width) package, it is included.A Surface Mount mounting is used for the LED driving board.This switch is of type General Purpose.To ensure reliable operation, set the temperature to -40°C~150°C TJ.The LED driving board operates at Not Required volts.A maximum voltage of N-Channel volts is available from the output of this LED driver.The lighting driver has Auto Restart, Status Flag features.There is a VNQ860 family of things that it belongs to.The termination count is 20.For operation, we use the 20 pins.It is important to note that the LED driving board has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 700mA.The supply voltage of 24V is conducive to high efficiency.As a result, it is mounted in the manner of Surface Mount.This LED driver is equipped with a total of 20 pins.270mOhm resistance is present in the lighting driver.It belongs to the VIPower? series.This results in a 250mA output current.It is self-contained in an econtainer with a capacity of Peripheral Drivers.The supply voltage (Vsup) should be kept above 5.5V for normal operation.Drivers for this part number 4 are available.
VNQ860-E Features
Supplied from 24V
Resistance of 270mOhm
VNQ860-E Applications
There are a lot of STMicroelectronics VNQ860-E Power Switches ICs applications.
- PC Cards
- Portable Devices
- Portable GPS Device
- PDAs
- USB Ports/Hubs
- Solid State Drivers
- Handheld Devices
- Set-top-box
- Storage Drives
- HDD, SSD