VNQ860SPTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| Feature | Auto Restart, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 270mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 90W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Terminal Pitch | 1.27mm |
| Base Part Number | VNQ860 |
| Pin Count | 10 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 700mA |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Supply Voltage-Min (Vsup) | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 70μA |
| Output Configuration | High Side |
| Power Dissipation | 90W |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 250mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 0.7A |
| Rds On (Typ) | 270m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.75mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNQ860SPTR-E Overview
The LED driver's packaged as a Tape & Reel (TR).This file is included in package PowerSO-10 Exposed Bottom Pad.The mounting type of the LED driver is Surface Mount.A General Purpose switch type is owned by it.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.The lighting driver is equipped with 4 outputs that can be used.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.This LED driving board is equipped with Auto Restart, Status Flag features in order for it to be useful.There is a VNQ860 family of things that it belongs to.The termination count is 10.In order to operate, the 10 pins are used.Currently, there are 1 functions associated with the lighting driver.To comply with the operation criteria, the maximum output current is reduced to 700mA.With a supply voltage of 24V, high efficiency is possible.In this case, it is mounted in the way of Surface Mount.In total, it has 10 pins.The LED driver has 270mOhm resistance.These electrical components are part of the VIPower? series.As a result, the output current is set to 250mA.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.The maximum supply voltage for this LED driver is 36V (Vsup).In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 5.5V.A 8/36V power supply is used by the part.
VNQ860SPTR-E Features
Supplied from 24V
Resistance of 270mOhm
VNQ860SPTR-E Applications
There are a lot of STMicroelectronics VNQ860SPTR-E Power Switches ICs applications.
- PC Card Hot Swap
- Smartphone and PDA
- PC Cards
- PDAs
- Wireless Headsets
- Portable GPS
- Hard Disk Drives
- USB Protection
- Wireless Modem Data Cards
- Solid State Drivers
