VNQ860TR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 270mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 16W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Terminal Pitch | 1.27mm |
| Base Part Number | VNQ860 |
| Pin Count | 20 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 250mA |
| Interface | On/Off |
| Nominal Supply Current | 70μA |
| Output Configuration | High Side |
| Power Dissipation | 16W |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 70μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 10 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 36V |
| Nominal Input Voltage | 36V |
| Turn-Off Delay Time | 40 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 0.7A |
| Rds On (Typ) | 270m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNQ860TR-E Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).The 20-SOIC (0.295, 7.50mm Width) package includes it.In this case, the LED driving board is mounted as Surface Mount.It owns General Purpose switch type.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.It is possible to use 4 outputs in the lighting driver.Operation is based on a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.A lighting driver with Auto Restart, Status Flag features is available.It comes under the family of VNQ860.In total, there are 20 terminations.The operation is performed through the 20 pins.It contains 1 functions.To meet the operation criteria, the maximum output current drops to 250mA.With a supply voltage of 24V, high efficiency is possible.The LED driving board is mounted in the way of Surface Mount.20 pins are connected to it in total.There is 270mOhm resistance on the LED driver.This electrical component can be found in the VIPower? series.It is set to 250mA in this case.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.It has a maximum input voltage of 36V volts.A voltage of 5.5V volts is the minimum input voltage.It has a maximum current requirement of 70μA.
VNQ860TR-E Features
Supplied from 24V
Resistance of 270mOhm
VNQ860TR-E Applications
There are a lot of STMicroelectronics VNQ860TR-E Power Switches ICs applications.
- Hot Swap
- Wearable Devices
- HDD and SSD
- Various applications equipped with buttons
- Hard Disk Drives
- Storage Drives
- Portable GPS
- Portable Devices
- Portable Video Game Players
- Smartphone and PDA
