VNS14NV04
| Parameters | |
|---|---|
| Terminal Finish | TIN LEAD |
| Max Power Dissipation | 4.6W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VNS14N |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 12A |
| Interface | On/Off |
| Nominal Supply Current | 100μA |
| Output Configuration | Low Side |
| Power Dissipation | 4.6W |
| Output Current | 12A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 100μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Continuous Drain Current (ID) | 12A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 40V |
| Turn On Time | 4.5 μs |
| Output Peak Current Limit-Nom | 18A |
| Rds On (Typ) | 35m Ω (Max) |
| Drain to Source Resistance | 35mOhm |
| Turn Off Time | 25 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 84.99187mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | OMNIFET II™, VIPower™ |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 35mOhm |
VNS14NV04 Overview
As you can see, it's packaged in the way of a Tube.Package 8-SOIC (0.154, 3.90mm Width) contains it.The mounting type of the LED driver is Surface Mount.The switch type is General Purpose.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.The LED driver is equipped with 1 outputs.To operate, it needs a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts.There is a VNS14N family of things that it belongs to.The termination count is 8.During operation, the 8 pins are used.The LED driver has 1 functions.This results in the maximum output current dropping to 12A to meet the operation criteria.The lighting driver is mounted in the way of Surface Mount.The LED driver has a total of 8 pins.35mOhm resistance is present in the lighting driver.Electrical components such as this are included in the OMNIFET II?, VIPower? series.The output current is set to 12A in this case.There is a maximum current requirement of 100μA for its operation.
VNS14NV04 Features
Resistance of 35mOhm
VNS14NV04 Applications
There are a lot of STMicroelectronics VNS14NV04 Power Switches ICs applications.
- USB Ports/Hubs
- Handheld Devices
- Storage Drives
- Solid State Drivers
- Notebook PC
- Solid-State Drives
- Hot Swap
- Low Voltage I/O System Power
- Various applications equipped with buttons
- Wireless Modem Data Cards
