VNS14NV04-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SO |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | OMNIFET II™, VIPower™ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 35mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 4.6W |
| Base Part Number | VNS14N |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 12A |
| Interface | On/Off |
| Current - Output (Max) | 12A |
| Nominal Supply Current | 100μA |
| Output Configuration | Low Side |
| Power Dissipation | 4.6W |
| Output Current | 12A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 100μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Continuous Drain Current (ID) | 12A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 40V |
| Rds On (Typ) | 35mOhm (Max) |
| Drain to Source Resistance | 35mOhm |
| RoHS Status | ROHS3 Compliant |
VNS14NV04-E Overview
It is packaged in the manner of a Tube.It is included in the package 8-SOIC (0.154, 3.90mm Width).A Surface Mount mounting is used for the LED driving board.General Purpose is the switch type that it owns.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.There are 1 outputs available on this lighting driver.To operate, it needs a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.It comes under the family of VNS14N.The 8 pins are used for the operation of the system.Its maximum output voltage is 12AV.The maximum output current is reduced to 12A to meet the operation criteria.Surface Mount is mounted in the way of this lighting driver.35mOhm resistance is present in the lighting driver.This electrical component is included in the OMNIFET II?, VIPower? series.This case has the output current set to 12A.For stable operation, the maximum operating temperature is 150°C°C.Ensure reliability by operating at a minimum temperature of -40°C degrees Celsius.100μA is the maximum current required to operate it.
VNS14NV04-E Features
Resistance of 35mOhm
VNS14NV04-E Applications
There are a lot of STMicroelectronics VNS14NV04-E Power Switches ICs applications.
- Telecom and Network Systems
- Hot Swap
- USB Power Distribution
- Set-top-box
- Low Voltage I/O System Power
- Mobile Communication Devices
- Hot Swaps
- Storage (HDDs, SSDs)
- HDD, SSD
- Various applications equipped with buttons
