banner_page

VNS14NV0413TR

N-Channel PMIC OMNIFET II?, VIPower? Series VNS14N 8 Pin 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-VNS14NV0413TR
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 710
  • Description: N-Channel PMIC OMNIFET II?, VIPower? Series VNS14N 8 Pin 8-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
ECCN Code EAR99
Resistance 35mOhm
Terminal Finish Tin (Sn)
Max Power Dissipation 4.6W
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Base Part Number VNS14N
Pin Count 8
Number of Outputs 1
Output Type N-Channel
Max Output Current 12A
Interface On/Off
Nominal Supply Current 100μA
Output Configuration Low Side
Power Dissipation 4.6W
Output Current 12A
Voltage - Supply (Vcc/Vdd) Not Required
Max Supply Current 100μA
Input Type Non-Inverting
Switch Type General Purpose
Output Current per Channel 12A
Continuous Drain Current (ID) 12A
Ratio - Input:Output 1:1
Voltage - Load 36V Max
Fault Protection Current Limiting (Fixed), Over Temperature, Over Voltage
Drain to Source Breakdown Voltage 40V
Turn On Time 4.5 μs
Output Peak Current Limit-Nom 18A
Rds On (Typ) 35m Ω (Max)
Drain to Source Resistance 35mOhm
Turn Off Time 25 μs
Built-in Protections TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL
Length 4.9mm
Width 3.9mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Contains Lead
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -40°C~150°C TJ
Packaging Cut Tape (CT)
Series OMNIFET II™, VIPower™
JESD-609 Code e3
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 8

VNS14NV0413TR Overview


The LED driver's packaged as a Cut Tape (CT).There is a 8-SOIC (0.154, 3.90mm Width) package that includes it.It has been mounted as Surface Mount on the LED driver.It owns the General Purpose switch type.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.The lighting driver is equipped with 1 outputs that can be used.The LED driving board operates at Not Required volts.The maximum output voltage of this LED driver is N-Channel volts.It comes under the family of VNS14N.It consists of 8 terminations in total.It is necessary to use the 8 pins in order to operate the LED driver.The LED driver has 1 functions.This results in the maximum output current dropping to 12A to meet the operation criteria.The lighting driver is mounted in the direction of Surface Mount.It is equipped with a total of 8 pins.Lighting drivers with 35mOhm resistance are used.This electrical component is included in the OMNIFET II?, VIPower? series.This case results in a 12A output current.It operates at a maximum current of 100μA.

VNS14NV0413TR Features


Resistance of 35mOhm

VNS14NV0413TR Applications


There are a lot of STMicroelectronics VNS14NV0413TR Power Switches ICs applications.

  • Set-Top Boxes
  • Low Voltage I/O System Power
  • Solid State Drivers
  • Hot Swap
  • Wearable Devices
  • USB Power Distribution
  • Wireless/Networking Cards
  • Wireless Modem Data Cards
  • Various applications equipped with buttons
  • Smartphone and PDA

Write a review

Note: HTML is not translated!
    Bad           Good