VNS14NV04TR-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SO |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | OMNIFET II™, VIPower™ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Resistance | 35mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 4.6W |
| Base Part Number | VNS14N |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 12A |
| Interface | On/Off |
| Current - Output (Max) | 12A |
| Nominal Supply Current | 100μA |
| Output Configuration | Low Side |
| Power Dissipation | 4.6W |
| Output Current | 12A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 100μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Drain to Source Voltage (Vdss) | 55V |
| Continuous Drain Current (ID) | 7A |
| Threshold Voltage | 2.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 40V |
| Rds On (Typ) | 35mOhm (Max) |
| Drain to Source Resistance | 35mOhm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNS14NV04TR-E Overview
The LED driver's packaged as a Tape & Reel (TR).There is a package for it in the 8-SOIC (0.154, 3.90mm Width) package.It has been mounted as Surface Mount on the LED driver.This switch is of type General Purpose.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.By default, it is set to output 1.The LED driving board is powered by a voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.It belongs to the family VNS14N.The operation is carried out using the 8 pins.In this case, the LED driving board can produce only 12AV as its maximum output.To comply with the operation criteria, the maximum output current is reduced to 12A.Surface Mount is mounted in the way of this LED driving board.In this LED driving board, there is 35mOhm resistance.This electrical component can be found in the OMNIFET II?, VIPower? series.In this case, the output current will be set to 12A.The maximum operating temperature of 150°C°C allows for stable operation.Reliability is ensured by operating at a minimum working temperature of -40°C degrees Celsius.It requires 100μA current to operate.
VNS14NV04TR-E Features
Resistance of 35mOhm
VNS14NV04TR-E Applications
There are a lot of STMicroelectronics VNS14NV04TR-E Power Switches ICs applications.
- PDAs
- Hard Disk Drives
- Hot Swaps
- Hot-Swap Systems
- Wireless Headsets
- USB3.1 Power Delivery
- USB Power Distribution
- HDD, SSD
- PC Card Hot Swap
- Wearable Devices
