VNS1NV04D-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | OMNIFET II™, VIPower™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Voltage - Rated DC | 40V |
| Max Power Dissipation | 4W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Current Rating | 1.7A |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VNS1N |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 1.7A |
| Interface | On/Off |
| Element Configuration | Single |
| Output Configuration | Low Side |
| Power Dissipation | 4W |
| Output Current | 2.6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Rise Time | 170ns |
| Drain to Source Voltage (Vdss) | 40V |
| Fall Time (Typ) | 200 ns |
| Turn-Off Delay Time | 350 ns |
| Continuous Drain Current (ID) | 500mA |
| Ratio - Input:Output | 1:1 |
| Gate to Source Voltage (Vgs) | 8V |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 40V |
| Rds On (Typ) | 250m Ω (Max) |
| Drain to Source Resistance | 250mOhm |
| Turn Off Time | 1 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNS1NV04D-E Overview
A Tube is used to package it.Package 8-SOIC (0.154, 3.90mm Width) contains it.In this case, the LED driving board is mounted as Surface Mount.General Purpose is the switch type it owns.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.The LED driver has a total of 2 outputs.The LED driving board operates with a supply voltage of Not Required.It has a maximum output voltage of N-Channel volts.It is part of the VNS1N family of LED drivers.It contains 8 terminations.In order to operate, 8 pins are used.As far as the lighting driver is concerned, there are 2 functions.As a result, the maximum output current is reduced to 1.7A in order to meet the operation requirements.Using a voltage of 5V allows for high efficiency.It is positioned in the direction of Surface Mount.The LED driver has a total of 8 pins.It belongs to the OMNIFET II?, VIPower? series.When this is the case, the output current is set to 2.6A.
VNS1NV04D-E Features
Supplied from 5V
VNS1NV04D-E Applications
There are a lot of STMicroelectronics VNS1NV04D-E Power Switches ICs applications.
- Wireless Headsets
- Hot Swap
- Hot-Swap Systems
- Gaming
- USB3.1 Power Delivery
- USB Power Distribution
- HDD, SSD
- PC Cards
- Set-top-box
- Storage (HDDs, SSDs)
