Parameters |
Lifecycle Status |
NRND (Last Updated: 8 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Series |
OMNIFET II™, VIPower™ |
JESD-609 Code |
e3 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
250mOhm |
Terminal Finish |
Tin (Sn) |
Max Power Dissipation |
4W |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
VNS1N |
Pin Count |
8 |
Number of Outputs |
2 |
Output Voltage |
45V |
Output Type |
N-Channel |
Max Output Current |
3.5A |
Interface |
On/Off |
Nominal Supply Current |
100μA |
Output Configuration |
Low Side |
Power Dissipation |
4W |
Output Current |
3.5A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Turn On Delay Time |
70 ns |
Switch Type |
General Purpose |
Output Current per Channel |
1.7A |
Drain to Source Voltage (Vdss) |
45V |
Turn-Off Delay Time |
350 ns |
Continuous Drain Current (ID) |
1.7A |
Threshold Voltage |
500mV |
Ratio - Input:Output |
1:1 |
Voltage - Load |
36V Max |
Fault Protection |
Current Limiting (Fixed), Over Temperature, Over Voltage |
Rds On (Typ) |
250m Ω (Max) |
Drain to Source Resistance |
250mOhm |
On-State Resistance |
250mOhm |
Height |
1.75mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
VNS1NV04DP-E Overview
The LED driver's packaged as a Tube.It is included with the 8-SOIC (0.154, 3.90mm Width) package as well.This lighting drivere has a mounting type of Surface Mount.General Purpose is the switch type it owns.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.The lighting driver has a total of 2 outputs that are available for use.A supply voltage of Not Required is required for it to operate.A maximum output voltage of N-Channel volts can be obtained with this LED driver.It comes under the family of VNS1N.It has a total of 8 terminations.For operation, 8 pins are used.Maximum output current falls to 3.5A when operation criteria are met.As a result, it is mounted in the manner of Surface Mount.This LED driver is equipped with a total of 8 pins.It has 250mOhm resistance.It is part of the OMNIFET II?, VIPower? series.When this is the case, the output current is set to 3.5A.
VNS1NV04DP-E Features
Resistance of 250mOhm
VNS1NV04DP-E Applications
There are a lot of STMicroelectronics VNS1NV04DP-E Power Switches ICs applications.
- Portable Video Game Players
- USB3.1 Power Delivery
- Hot Swaps
- Hot Swap
- Various applications equipped with buttons
- Portable Devices
- PDAs
- Hot Swap
- Hot-Swap Systems
- USB Power Distribution