VNS1NV04DPTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | OMNIFET II™, VIPower™ |
| JESD-609 Code | e6 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Bismuth (Sn/Ag/Bi) |
| Max Power Dissipation | 4W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VNS1N |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 1.7A |
| Voltage | 40V |
| Interface | On/Off |
| Nominal Supply Current | 100μA |
| Current | 1.7A |
| Output Configuration | Low Side |
| Power Dissipation | 4W |
| Output Current | 1.7A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Rise Time | 170ns |
| Drain to Source Voltage (Vdss) | 45V |
| Fall Time (Typ) | 200 ns |
| Continuous Drain Current (ID) | 1.7A |
| Threshold Voltage | 500mV |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 45V |
| Rds On (Typ) | 250m Ω (Max) |
| Max Junction Temperature (Tj) | 150°C |
| Drain to Source Resistance | 250mOhm |
| Nominal Vgs | 500 mV |
| On-State Resistance | 250mOhm |
| Height | 1.75mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNS1NV04DPTR-E Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).The 8-SOIC (0.154, 3.90mm Width) package contains it.The lighting driver is mounted in the Surface Mount position.A General Purpose switch type is owned by it.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.There is a default setting of 2 for output.Operation is based on a supply voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.The VNS1N family consists of this type.It contains 8 terminations.8 pins are used for operation.To meet the operation criteria, the maximum output current drops to 1.7A.Surface Mount is mounted in the way of this LED driving board.This LED driver is equipped with a total of 8 pins.It is included in the OMNIFET II?, VIPower? series.The output current is set to 1.7A in this case.
VNS1NV04DPTR-E Features
VNS1NV04DPTR-E Applications
There are a lot of STMicroelectronics VNS1NV04DPTR-E Power Switches ICs applications.
- Portable Music Players
- Storage Drives
- Wireless Modem Data Cards
- HDD, SSD
- Low Voltage I/O System Power
- Various applications equipped with buttons
- Smart Phones, Feature Phones
- Portable GPS Device
- Notebook and Tablet Computers
- Portable Devices
