VNS1NV04DTR-E

N-Channel PMIC OMNIFET II?, VIPower? Series VNS1N 8 Pin 8-SOIC (0.154, 3.90mm Width)

Manufacturer: STMicroelectronics
Nocochips NO: 761-VNS1NV04DTR-E
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 546
Description: N-Channel PMIC OMNIFET II?, VIPower? Series VNS1N 8 Pin 8-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Supplier Device Package	8-SO
Operating Temperature	-40°C~150°C TJ
Packaging	Tape & Reel (TR)
Series	OMNIFET II™, VIPower™
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Resistance	250mOhm
Max Operating Temperature	150°C
Min Operating Temperature	-40°C
Max Power Dissipation	4W
Base Part Number	VNS1N
Number of Outputs	2
Output Type	N-Channel
Max Output Current	3.5A
Interface	On/Off
Current - Output (Max)	1.7A
Output Configuration	Low Side
Power Dissipation	4W
Output Current	2.6A
Voltage - Supply (Vcc/Vdd)	Not Required
Input Type	Non-Inverting
Switch Type	General Purpose
Output Current per Channel	1.7A
Continuous Drain Current (ID)	1.7A
Ratio - Input:Output	1:1
Voltage - Load	36V Max
Fault Protection	Current Limiting (Fixed), Over Temperature, Over Voltage
Drain to Source Breakdown Voltage	40V
Rds On (Typ)	250mOhm (Max)
Drain to Source Resistance	250mOhm
Height	1.25mm
Length	5mm
Width	4mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

VNS1NV04DTR-E Overview

It is packaged in the form of a Tape & Reel (TR).It is included with the 8-SOIC (0.154, 3.90mm Width) package as well.This LED driving board is mounted using the mounting type Surface Mount.General Purpose is the type of switch owned by it.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.There are 2 outputs available on this lighting driver.The LED driving board operates with a supply voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.I believe it belongs to the VNS1N family.In order to operate, the 8 pins are used.There is a maximum output of 1.7AV from the LED driver.In order to meet the operation criteria, the maximum output current drops to 3.5A.As a result, it is mounted in the manner of Surface Mount.Currently, the LED driving board has a resistance of 250mOhm ohms.This electrical component is included in the OMNIFET II?, VIPower? series.This case results in a 2.6A output current.It is recommended that the maximum operating temperature be 150°C°C to ensure stable operation.To ensure reliability, it should operate at -40°C degrees Celsius.