VNS1NV04P-E
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SO |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | OMNIFET II™, VIPower™ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Resistance | 250mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 8.3W |
| Base Part Number | VNS1N |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 3.5A |
| Interface | On/Off |
| Current - Output (Max) | 1.7A |
| Nominal Supply Current | 100μA |
| Output Configuration | Low Side |
| Power Dissipation | 8.3W |
| Output Current | 1.7A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 1.7A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 250mOhm (Max) |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VNS1NV04P-E Overview
Tube is the way it's packaged.Package 8-SOIC (0.154, 3.90mm Width) contains it.Mounting type Surface Mount is selected for the LED driving board.This switch is of type General Purpose.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.The lighting driver is equipped with 1 outputs that can be used.A voltage of Not Required is used to power it.There is a maximum output voltage of N-Channel volts.It belongs to the VNS1N family.In order to operate, 8 pins are used.This LED driver has a maximum output of 1.7AV.It is necessary to reduce the maximum output current to 3.5A to meet the operation criteria.It is positioned in the direction of Surface Mount.The LED driver has 250mOhm resistance.It is included in the OMNIFET II?, VIPower? series.When this is the case, the output current is set to 1.7A.In order to ensure stable operation, a maximum operating temperature of 150°C°C should be maintained.To ensure reliability, it should operate at -40°C degrees Celsius.
VNS1NV04P-E Features
Resistance of 250mOhm
VNS1NV04P-E Applications
There are a lot of STMicroelectronics VNS1NV04P-E Power Switches ICs applications.
- Portable Music Players
- Portable GPS
- Hard Disk Drives
- USB Power Distribution
- Hot Swap
- Set-top-box
- Handheld Devices
- HDD and SSD
- Telecom and Network Systems
- Smart Phones, Feature Phones
