VNS1NV04PTR-E
| Parameters | |
|---|---|
| Turn Off Time | 5.5 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | OMNIFET II™, VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 8.3W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VNS1N |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.7A |
| Interface | On/Off |
| Nominal Supply Current | 100μA |
| Output Configuration | Low Side |
| Power Dissipation | 8.3W |
| Output Current | 1.7A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Rise Time | 170ns |
| Fall Time (Typ) | 200 ns |
| Continuous Drain Current (ID) | 30μA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 45V |
| Output Peak Current Limit-Nom | 1.7A |
| Rds On (Typ) | 250m Ω (Max) |
| Drain to Source Resistance | 250mOhm |
VNS1NV04PTR-E Overview
The LED driver's packaged as a Tape & Reel (TR).This file is included in package 8-SOIC (0.154, 3.90mm Width).The lighting driver has the mounting type Surface Mount.A General Purpose switch type is owned by it.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.There are 1 outputs available on this lighting driver.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.It belongs to the VNS1N family.As a result, there are 8 terminations.The 8 pins are used for the operation of the system.It is important to note that the LED driving board has 1 functions.This results in the maximum output current dropping to 1.7A to meet the operation criteria.The supply voltage of 5V is conducive to high efficiency.This lighting driver is mounted in the way of Surface Mount.8 pins are equipped with it.It is part of the OMNIFET II?, VIPower? series.The output current is set to 1.7A in this case.
VNS1NV04PTR-E Features
Supplied from 5V
VNS1NV04PTR-E Applications
There are a lot of STMicroelectronics VNS1NV04PTR-E Power Switches ICs applications.
- Gaming
- USB Ports/Hubs
- Portable Music Players
- Various applications equipped with buttons
- Portable GPS
- Wireless Headsets
- PC Cards
- Low Voltage I/O System Power
- USB Power Distribution
- Hot Swaps
