Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Supplier Device Package |
8-SO |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
Series |
OMNIFET II™, VIPower™ |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Max Operating Temperature |
150°C |
Min Operating Temperature |
-40°C |
Base Part Number |
VNS1N |
Number of Outputs |
1 |
Output Type |
N-Channel |
Max Output Current |
1.7A |
Interface |
On/Off |
Max Supply Voltage |
40V |
Current - Output (Max) |
1.7A |
Nominal Supply Current |
100μA |
Output Configuration |
Low Side |
Power Dissipation |
8.3W |
Output Current |
1.7A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Continuous Drain Current (ID) |
1.7A |
Ratio - Input:Output |
1:1 |
Voltage - Load |
36V Max |
Fault Protection |
Current Limiting (Fixed), Over Temperature, Over Voltage |
Drain to Source Breakdown Voltage |
40V |
Rds On (Typ) |
250mOhm (Max) |
Drain to Source Resistance |
250mOhm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
VNS1NV04TR-E Overview
It is packaged in the manner of a Tape & Reel (TR).It's included in the 8-SOIC (0.154, 3.90mm Width) package.A Surface Mount mounting is used for the LED driving board.There is a switch type of General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.The lighting driver is equipped with 1 outputs that can be used.Operation is based on Not Required supply voltage.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It is a member of the VNS1N family.In order to operate, the 8 pins are used.Its maximum output voltage is 1.7AV.This operation requires the maximum output current to be decreased to 1.7A.Surface Mount is mounted in the way.The OMNIFET II?, VIPower? series includes this electrical component.It is set to 1.7A in this case.A maximum operating temperature of 150°C°C is required to provide stable operation.To ensure reliability, the system operates at a minimum temperature of -40°C degrees Celsius.The greatest supply voltage it can handle is 40VV.
VNS1NV04TR-E Features
VNS1NV04TR-E Applications
There are a lot of STMicroelectronics VNS1NV04TR-E Power Switches ICs applications.
- HDD, SSD
- Various applications equipped with buttons
- Solid State Drivers
- Storage Drives
- Solid-State Drives
- Storage (HDDs, SSDs)
- USB3.1 Power Delivery
- Portable/Handheld Devices
- Hot Swap
- Notebook and Tablet Computers