VNS3NV04-E

N-Channel PMIC OMNIFET II?, VIPower? Series VNS3N 8 Pin 8-SOIC (0.154, 3.90mm Width)

Manufacturer: STMicroelectronics
Nocochips NO: 761-VNS3NV04-E
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 309
Description: N-Channel PMIC OMNIFET II?, VIPower? Series VNS3N 8 Pin 8-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Rds On (Typ)	120m Ω (Max)
Drain to Source Resistance	120mOhm
RoHS Status	ROHS3 Compliant
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Operating Temperature	-40°C~150°C TJ
Packaging	Tube
Series	OMNIFET II™, VIPower™
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Resistance	120mOhm
Max Power Dissipation	8.3W
Base Part Number	VNS3N
Number of Outputs	1
Output Type	N-Channel
Max Output Current	3.5A
Interface	On/Off
Nominal Supply Current	100μA
Output Configuration	Low Side
Power Dissipation	8.3W
Output Current	3.5A
Voltage - Supply (Vcc/Vdd)	Not Required
Max Supply Current	100μA
Input Type	Non-Inverting
Switch Type	General Purpose
Continuous Drain Current (ID)	3.5A
Ratio - Input:Output	1:1
Voltage - Load	36V Max
Fault Protection	Current Limiting (Fixed), Over Temperature, Over Voltage
Drain to Source Breakdown Voltage	40V

VNS3NV04-E Overview

It's?packaged?in?the way?of?a?Tube.The 8-SOIC (0.154, 3.90mm Width) package includes it.This LED driving board is mounted using the mounting type Surface Mount.A General Purpose switch type is owned by it.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.As a default, the output is set to 1.To operate, it needs a supply voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.It belongs to the family VNS3N.The operation is carried out using the 8 pins.In order to meet the operation criteria, the maximum output current drops to 3.5A.It is mounted in the way of Surface Mount.The LED driver has 120mOhm resistance.It is included in the OMNIFET II?, VIPower? series.It is set to 3.5A in this case.For its operation, a maximum current requirement of 100μA is required.