Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Series |
OMNIFET II™, VIPower™ |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
TIN LEAD |
Max Power Dissipation |
4W |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
2 |
Base Part Number |
VNS3N |
Pin Count |
8 |
Number of Outputs |
2 |
Output Type |
N-Channel |
Max Output Current |
3.5A |
Interface |
On/Off |
Nominal Supply Current |
100μA |
Output Configuration |
Low Side |
Power Dissipation |
4W |
Output Current |
3.5A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Continuous Drain Current (ID) |
3.5A |
Ratio - Input:Output |
1:1 |
Gate to Source Voltage (Vgs) |
20V |
Voltage - Load |
36V Max |
Fault Protection |
Current Limiting (Fixed), Over Temperature, Over Voltage |
Drain to Source Breakdown Voltage |
45V |
Turn On Time |
1.35 µs |
Output Peak Current Limit-Nom |
5A |
Rds On (Typ) |
120m Ω (Max) |
Drain to Source Resistance |
120mOhm |
Turn Off Time |
10 µs |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
Height Seated (Max) |
1.75mm |
Length |
4.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Lead Free |
VNS3NV04D Overview
Tube is the way it's packaged.The 8-SOIC (0.154, 3.90mm Width) package includes it.In this case, the LED driving board is mounted as Surface Mount.A General Purpose switch type is owned by it.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.The LED driver has 2 outputs.Operation is based on a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.There is a VNS3N family of things that it belongs to.A total of 8 terminations have been found in it.For operation, we use the 8 pins.As far as functions are concerned, the lighting driver has 2.This results in the maximum output current dropping to 3.5A to meet the operation criteria.The lighting driver is mounted in the way of Surface Mount.A total of 8 pins are included in this LED driver.There is an electrical component included in the OMNIFET II?, VIPower? series.This results in a 3.5A output current.
VNS3NV04D Features
VNS3NV04D Applications
There are a lot of STMicroelectronics VNS3NV04D Power Switches ICs applications.
- Handheld Devices
- Various applications equipped with buttons
- Solid State Drivers
- Set-top-box
- Hot-Swap Systems
- Storage Drives
- Smartphone and PDA
- Storage (HDDs, SSDs)
- HDD, SSD
- PDAs