VNS3NV04D-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | OMNIFET II™, VIPower™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 120mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VNS3N |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 5A |
| Supply Voltage-Max (Vsup) | 30V |
| Supply Voltage-Min (Vsup) | 13V |
| Interface | On/Off |
| Nominal Supply Current | 100μA |
| Output Configuration | Low Side |
| Power Dissipation | 4W |
| Output Current | 3.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 3.5A |
| Continuous Drain Current (ID) | 3.5A |
| Ratio - Input:Output | 1:1 |
| Gate to Source Voltage (Vgs) | 20V |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 45V |
| Turn On Time | 1.35 µs |
| Output Peak Current Limit-Nom | 5A |
| Rds On (Typ) | 120m Ω (Max) |
| Drain to Source Resistance | 120mOhm |
| Turn Off Time | 10 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
VNS3NV04D-E Overview
Tube is the way it's packaged.It is included in the package 8-SOIC (0.154, 3.90mm Width).The mounting type of the LED driver is Surface Mount.It owns General Purpose switch type.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.There is a default setting of 2 for output.The LED driving board operates at Not Required volts.A maximum voltage of N-Channel volts is available from the output of this LED driver.It is part of the VNS3N family of LED drivers.It contains 8 terminations.It is necessary to use the 8 pins in order to operate the LED driver.It has 2 functions.To meet the operation criteria, the maximum output current drops to 5A.It is possible to achieve a high level of efficiency with a supply voltage of 15V.Surface Mount is mounted in the way.The LED driver has a total of 8 pins.In this case, there is 120mOhm resistance in the LED driving board.Electrical components such as this are included in the OMNIFET II?, VIPower? series.The output current is set to 3.5A in this case.The Vsup value (maximum supply voltage) is set to 30V.To maintain a normal operation, the supply voltage (Vsup) must be maintained above 13V.
VNS3NV04D-E Features
Supplied from 15V
Resistance of 120mOhm
VNS3NV04D-E Applications
There are a lot of STMicroelectronics VNS3NV04D-E Power Switches ICs applications.
- PDAs
- Wireless/Networking Cards
- Hard Disk Drives
- Portable/Handheld Devices
- Portable Devices
- Portable GPS
- USB Ports/Hubs
- USB Protection
- Hot Swap
- Mobile Communication Devices
