VNS3NV04DP-E
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | OMNIFET II™, VIPower™ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 120mOhm |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Base Part Number | VNS3N |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 5A |
| Interface | On/Off |
| Element Configuration | Dual |
| Nominal Supply Current | 100μA |
| Output Configuration | Low Side |
| Output Current | 3.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 90 ns |
| Switch Type | General Purpose |
| Output Current per Channel | 3.5A |
| Rise Time | 250ns |
| Fall Time (Typ) | 250 ns |
| Turn-Off Delay Time | 450 ns |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Turn On Time | 1.35 µs |
| Output Peak Current Limit-Nom | 5A |
| Rds On (Typ) | 120m Ω (Max) |
| Max Junction Temperature (Tj) | 150°C |
| Turn Off Time | 10 µs |
| Built-in Protections | THERMAL; OVER VOLTAGE |
| On-State Resistance | 120mOhm |
| Height | 1.75mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNS3NV04DP-E Overview
It is packaged in the manner of a Tube.The 8-SOIC (0.154, 3.90mm Width) package contains it.A Surface Mount mounting is used for the LED driving board.It owns the General Purpose switch type.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.In this LED driver, there are no outputs available.A voltage of Not Required is used to power it.The maximum output voltage is N-Channel volts.As you can see, it comes from the VNS3N family.The termination count is 8.In order to operate, 8 pins are used.The LED driving board has a total of 2 functions.In order to meet the operation criteria, the maximum output current drops to 5A.In this case, it is mounted in the way of Surface Mount.In total, it has 8 pins.Currently, the LED driving board has 120mOhm resistance.It belongs to the OMNIFET II?, VIPower? series.The output current is set to 3.5A in this case.
VNS3NV04DP-E Features
Resistance of 120mOhm
VNS3NV04DP-E Applications
There are a lot of STMicroelectronics VNS3NV04DP-E Power Switches ICs applications.
- PDAs
- Various applications equipped with buttons
- Gaming
- USB Power Distribution
- Hard Disk Drives
- Hot-Swap Systems
- USB Power Distribution
- HDD and SSD
- Set-Top Boxes
- Telecom and Network Systems
