VNS3NV04DPTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | OMNIFET II™, VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 120mOhm |
| Terminal Finish | MATTE TIN |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Base Part Number | VNS3N |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 40V |
| Output Type | N-Channel |
| Max Output Current | 5A |
| Voltage | 40V |
| Interface | On/Off |
| Nominal Supply Current | 100μA |
| Current | 3.5A |
| Output Configuration | Low Side |
| Output Current | 3.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 3.5A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Turn On Time | 1.35 µs |
| Output Peak Current Limit-Nom | 5A |
| Rds On (Typ) | 120m Ω (Max) |
| Max Junction Temperature (Tj) | 150°C |
| Turn Off Time | 10 µs |
| Built-in Protections | THERMAL; OVER VOLTAGE |
| On-State Resistance | 120mOhm |
| Height | 1.75mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNS3NV04DPTR-E Overview
Tape & Reel (TR) is the way it's packaged.It is included with the 8-SOIC (0.154, 3.90mm Width) package as well.The LED driver is mounted as Surface Mount.There is a switch type of General Purpose.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.By default, it is set to output 2.With a supply voltage of Not Required, the LED driving board operates.The maximum output voltage of this LED driver is N-Channel volts.This object belongs to the VNS3N family.It consists of 8 terminations in total.The 8 pins are used for the operation of the system.Currently, the lighting driver has a total of 2 functions.This operation requires the maximum output current to be decreased to 5A.The LED driving board is mounted in the way of Surface Mount.As a result, it has a total of 8 pins.In this case, there is 120mOhm resistance in the LED driving board.This electrical component is part of the OMNIFET II?, VIPower? series.When this is the case, the output current is set to 3.5A.
VNS3NV04DPTR-E Features
Resistance of 120mOhm
VNS3NV04DPTR-E Applications
There are a lot of STMicroelectronics VNS3NV04DPTR-E Power Switches ICs applications.
- USB Power Distribution
- Low Voltage I/O System Power
- Portable GPS Device
- Gaming
- Portable/Handheld Devices
- USB Protection
- USB Ports/Hubs
- USB3.1 Power Delivery
- Hot-Swap Systems
- Handheld Devices
