VNS3NV04DTR-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | OMNIFET II™, VIPower™ |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 120mOhm |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | VNS3N |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 5A |
| Supply Voltage-Max (Vsup) | 30V |
| Supply Voltage-Min (Vsup) | 13V |
| Interface | On/Off |
| Nominal Supply Current | 100μA |
| Output Configuration | Low Side |
| Power Dissipation | 4W |
| Output Current | 3.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 3.5A |
| Continuous Drain Current (ID) | 3.5A |
| Ratio - Input:Output | 1:1 |
| Gate to Source Voltage (Vgs) | 20V |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 45V |
| Turn On Time | 1.35 µs |
| Output Peak Current Limit-Nom | 5A |
| Rds On (Typ) | 120m Ω (Max) |
| Drain to Source Resistance | 120mOhm |
| Turn Off Time | 10 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNS3NV04DTR-E Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).There is a 8-SOIC (0.154, 3.90mm Width) package that includes it.The mounting type of the LED driver is Surface Mount.It owns the General Purpose switch type.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.By default, it is set to output 2.Operation is based on Not Required supply voltage.A maximum output voltage of N-Channel volts can be obtained with this LED driver.The VNS3N family consists of this type.It contains 8 terminations.The 8 pins are used for the operation of the system.As far as the lighting driver is concerned, there are 2 functions.In order to meet the operation criteria, the maximum output current drops to 5A.It is possible to achieve a high level of efficiency with a supply voltage of 15V.In this case, it is mounted in the way of Surface Mount.A total of 8 pins are included in this LED driver.Currently, the LED driving board has a resistance of 120mOhm ohms.It belongs to the OMNIFET II?, VIPower? series.When this is the case, the output current is set to 3.5A.This LED driver is configured to have a maximum supply voltage of 30V (Vsup).In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 13V.
VNS3NV04DTR-E Features
Supplied from 15V
Resistance of 120mOhm
VNS3NV04DTR-E Applications
There are a lot of STMicroelectronics VNS3NV04DTR-E Power Switches ICs applications.
- Smartphone and PDA
- Hot-Swap Systems
- Storage (HDDs, SSDs)
- Hot Swap
- Portable GPS
- Hot Swaps
- Set-Top Boxes
- USB3.1 Power Delivery
- Wireless/Networking Cards
- PC Card Hot Swap
