VNS3NV04PTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | OMNIFET II™, VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 120mOhm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 8.3W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | VNN3N |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 5A |
| Interface | On/Off |
| Nominal Supply Current | 100μA |
| Output Configuration | Low Side |
| Power Dissipation | 8.3W |
| Output Current | 3.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 3.5A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 5A |
| Rds On (Typ) | 120m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNS3NV04PTR-E Overview
The LED driver's packaged as a Tape & Reel (TR).There is a package for it in the 8-SOIC (0.154, 3.90mm Width) package.The mounting type of the LED driver is Surface Mount.This switch is of type General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.The LED driver has 1 outputs.It uses a supply voltage of Not Required to operate.The maximum output voltage of this LED driver is N-Channel volts.It is part of the VNN3N family of LED drivers.As a result, there are 8 terminations.The 8 pins are used for the operation of the system.It has 1 functions.As a result, the maximum output current is reduced to 5A in order to meet the operation requirements.As long as the supply voltage is 5V, high efficiency can be achieved.This lighting driver is mounted in the way of Surface Mount.8 pins are equipped with it.120mOhm is the resistance of the lighting driver.This electrical component can be found in the OMNIFET II?, VIPower? series.This case has the output current set to 3.5A.
VNS3NV04PTR-E Features
Supplied from 5V
Resistance of 120mOhm
VNS3NV04PTR-E Applications
There are a lot of STMicroelectronics VNS3NV04PTR-E Power Switches ICs applications.
- Wireless Headsets
- Hot Swaps
- Smartphone and PDA
- Telecom and Network Systems
- Notebook PC
- USB Protection
- Hot Swap
- HDD, SSD
- Various applications equipped with buttons
- Portable Devices
