VNS3NV04TR-E
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | OMNIFET II™, VIPower™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Max Power Dissipation | 8.3W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VNS3N |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 3.5A |
| Supply Voltage-Max (Vsup) | 30V |
| Interface | On/Off |
| Nominal Supply Current | 100μA |
| Output Configuration | Low Side |
| Power Dissipation | 8.3W |
| Output Current | 3.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Continuous Drain Current (ID) | 3.5A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 40V |
| Output Peak Current Limit-Nom | 5A |
| Rds On (Typ) | 120m Ω (Max) |
| Drain to Source Resistance | 120mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
VNS3NV04TR-E Overview
A Tape & Reel (TR) is used to package it.This package is included in 8-SOIC (0.154, 3.90mm Width).This LED driving board is mounted using the mounting type Surface Mount.A General Purpose switch type is owned by it.To ensure reliable operation, set the temperature to -40°C~150°C TJ.The lighting driver has a total of 1 outputs that are available for use.To operate, it needs a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.As you can see, it comes from the VNS3N family.It has a total of 8 terminations.For operation, we use the 8 pins.It consists of 2 functions.It is necessary to reduce the maximum output current to 3.5A to meet the operation criteria.The supply voltage of 15V is conducive to high efficiency.The lighting driver is mounted in the way of Surface Mount.8 pins are equipped with it.This electrical component is included in the OMNIFET II?, VIPower? series.In this case, the output current will be set to 3.5A.Vsup (maximum supply voltage) is set to 30V.
VNS3NV04TR-E Features
Supplied from 15V
VNS3NV04TR-E Applications
There are a lot of STMicroelectronics VNS3NV04TR-E Power Switches ICs applications.
- Mobile Communication Devices
- USB Power Distribution
- Hard Disk Drives
- Hot-Swap Systems
- Portable Music Players
- Portable/Handheld Devices
- HDD, SSD
- Portable GPS
- Notebook and Tablet Computers
- Handheld Devices
