VNV10N07
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Packaging | Tube |
| Series | OMNIFET™, VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 100mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Power Dissipation | 50W |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Base Part Number | VNV10 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 10A |
| Operating Supply Voltage | 18V |
| Interface | On/Off |
| Nominal Supply Current | 250μA |
| Output Configuration | Low Side |
| Power Dissipation | 50W |
| Output Current | 7A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 250μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Characteristics | OPEN-DRAIN |
| Output Current per Channel | 7A |
| Continuous Drain Current (ID) | 10A |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | SCHMITT TRIGGER |
| Voltage - Load | 55V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 70V |
| Turn On Time | 0.9 μs |
| Output Peak Current Limit-Nom | 10A |
| Rds On (Typ) | 100m Ω (Max) |
| Drain to Source Resistance | 100mOhm |
| Turn Off Time | 6 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VNV10N07 Overview
The LED driver's packaged as a Tube.There is a package for it in the PowerSO-10 Exposed Bottom Pad package.The lighting driver has the mounting type Surface Mount.This switch is of type General Purpose.In this LED driver, there are no outputs available.A voltage of Not Required is used to power it.The maximum output voltage of this LED driver is N-Channel volts.As you can see, it comes from the VNV10 family.As a result, there are 10 terminations.The operation is performed through the 10 pins.It is important to note that the LED driving board has 1 functions.This operation requires the maximum output current to be decreased to 10A.The lighting driver is mounted in the direction of Surface Mount.10 pins are connected to it in total.The LED driver has 100mOhm resistance.These electrical components are part of the OMNIFET?, VIPower? series.This results in a 7A output current.A supply voltage of 18V is recommended for maximum efficiency.It has a maximum current requirement of 250μA.
VNV10N07 Features
Resistance of 100mOhm
VNV10N07 Applications
There are a lot of STMicroelectronics VNV10N07 Power Switches ICs applications.
- Portable GPS Device
- Portable Video Game Players
- Portable Music Players
- Storage Drives
- Portable GPS
- Hard Disk Drives
- Smartphone and PDA
- Solid-State Drives
- Wearable Devices
- Wireless/Networking Cards
