Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
PowerSO-10 Exposed Bottom Pad |
Number of Pins |
10 |
Packaging |
Tube |
Series |
OMNIFET™, VIPower™ |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
10 |
ECCN Code |
EAR99 |
Resistance |
70mOhm |
Terminal Finish |
Matte Tin (Sn) |
Max Power Dissipation |
50W |
Technology |
MOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Base Part Number |
VNV14 |
Pin Count |
10 |
Number of Outputs |
1 |
Output Type |
N-Channel |
Max Output Current |
10A |
Operating Supply Voltage |
18V |
Interface |
On/Off |
Nominal Supply Current |
250μA |
Output Configuration |
Low Side |
Power Dissipation |
50W |
Output Current |
10A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
250μA |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Output Characteristics |
OPEN-DRAIN |
Continuous Drain Current (ID) |
14A |
Output Polarity |
TRUE |
Ratio - Input:Output |
1:1 |
Input Characteristics |
SCHMITT TRIGGER |
Voltage - Load |
35V Max |
Fault Protection |
Current Limiting (Fixed), Over Temperature, Over Voltage |
Drain to Source Breakdown Voltage |
42V |
Turn On Time |
0.5 μs |
Output Peak Current Limit-Nom |
14A |
Rds On (Typ) |
70m Ω (Max) |
Drain to Source Resistance |
70mOhm |
Turn Off Time |
7.5 μs |
Built-in Protections |
TRANSIENT; OVER CURRENT; THERMAL |
Height Seated (Max) |
3.75mm |
Length |
9.4mm |
Width |
7.5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
VNV14N04 Overview
It's?packaged?in?the way?of?a?Tube.There is a package for it in the PowerSO-10 Exposed Bottom Pad package.This lighting drivere has a mounting type of Surface Mount.A General Purpose switch type is owned by it.As a default, the output is set to 1.Operation is based on a supply voltage of Not Required.It has a maximum output voltage of N-Channel volts.It belongs to the VNV14 family.As a result, there are 10 terminations.For operation, 10 pins are used.There are 1 functions of the LED driver.It is necessary to reduce the maximum output current to 10A to meet the operation criteria.It is mounted in the way of Surface Mount.It is equipped with a total of 10 pins.Lighting drivers with 70mOhm resistance are used.A component of this type is included in the OMNIFET?, VIPower? series.When this case is used, the output current is set to 10A.The supply voltage should be set at 18V for best efficiency.The maximum current required for its operation is 250μA.
VNV14N04 Features
Resistance of 70mOhm
VNV14N04 Applications
There are a lot of STMicroelectronics VNV14N04 Power Switches ICs applications.
- HDD and SSD
- Notebook PC
- Storage Drives
- Hard Disk Drives
- PDAs
- Portable Music Players
- Wireless Headsets
- USB Power Distribution
- Storage (HDDs, SSDs)
- Notebook and Tablet Computers