VNV14N04-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Packaging | Tube |
| Series | OMNIFET™, VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Resistance | 70mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Power Dissipation | 50W |
| Base Part Number | VNV14 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 14A |
| Operating Supply Voltage | 18V |
| Interface | On/Off |
| Nominal Supply Current | 250μA |
| Output Configuration | Low Side |
| Power Dissipation | 50W |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 250μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Continuous Drain Current (ID) | 14A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 35V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 42V |
| Rds On (Typ) | 70m Ω (Max) |
| Drain to Source Resistance | 70mOhm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VNV14N04-E Overview
As you can see, it's packaged in the way of a Tube.This package is included in PowerSO-10 Exposed Bottom Pad.Surface Mount is the mounting type of the LED driver.General Purpose is the switch type it owns.The LED driver has 1 outputs.The LED driving board operates at Not Required volts.It has a maximum output voltage of N-Channel volts.I believe it belongs to the VNV14 family.In order to operate, 10 pins are used.This results in the maximum output current dropping to 14A to meet the operation criteria.Surface Mount is mounted in the way.In this LED driving board, there is 70mOhm resistance.It belongs to the OMNIFET?, VIPower? series.When this case is used, the output current is set to 10A.When using this LED driving board, it is recommended that the supply voltage is set to 18V.For its operation, a current of 250μA is required.
VNV14N04-E Features
Resistance of 70mOhm
VNV14N04-E Applications
There are a lot of STMicroelectronics VNV14N04-E Power Switches ICs applications.
- PC Card Hot Swap
- Hot Swap
- Hard Disk Drives
- USB Power Distribution
- PC Cards
- Low Voltage I/O System Power
- Solid-State Drives
- USB Ports/Hubs
- Set-top-box
- Telecom and Network Systems
