VNV20N07
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 50mOhm |
| Max Power Dissipation | 83W |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Base Part Number | VNV20 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 14A |
| Operating Supply Voltage | 18V |
| Interface | On/Off |
| Nominal Supply Current | 250μA |
| Output Configuration | Low Side |
| Power Dissipation | 83W |
| Output Current | 14A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 250μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Characteristics | OPEN-DRAIN |
| Continuous Drain Current (ID) | 20A |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | SCHMITT TRIGGER |
| Voltage - Load | 55V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 70V |
| Output Peak Current Limit-Nom | 20A |
| Rds On (Typ) | 50m Ω (Max) |
| Drain to Source Resistance | 50mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Packaging | Tube |
| Series | OMNIFET™, VIPower™ |
| Part Status | Obsolete |
VNV20N07 Overview
It's?packaged?in?the way?of?a?Tube.This package is included in PowerSO-10 Exposed Bottom Pad.The lighting driver is mounted in the Surface Mount position.General Purpose is the switch type that it owns.There is a default setting of 1 for output.With a supply voltage of Not Required, the LED driving board operates.A maximum voltage of N-Channel volts is available from the output of this LED driver.The VNV20 family consists of this type.It contains 10 terminations.10 pins are used for operation.Currently, the lighting driver has a total of 1 functions.This operation requires the maximum output current to be decreased to 14A.Surface Mount is mounted in the way.As a result, it has a total of 10 pins.In this case, there is 50mOhm resistance in the LED driving board.This electrical component can be found in the OMNIFET?, VIPower? series.This results in a 14A output current.In order to optimize the efficiency of the supply voltage, it should be set to 18V.For its operation, a current of 250μA is required.
VNV20N07 Features
Resistance of 50mOhm
VNV20N07 Applications
There are a lot of STMicroelectronics VNV20N07 Power Switches ICs applications.
- Storage Drives
- Handheld Devices
- USB Power Distribution
- Wireless/Networking Cards
- HDD and SSD
- USB Ports/Hubs
- Mobile Communication Devices
- Hot Swap
- Solid State Drivers
- Set-Top Boxes
