VNV28N04-E
| Parameters | |
|---|---|
| Nominal Supply Current | 250μA |
| Output Configuration | Low Side |
| Power Dissipation | 83W |
| Output Current | 19A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 250μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Continuous Drain Current (ID) | 28A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 31V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 42V |
| Rds On (Typ) | 35mOhm (Max) |
| Drain to Source Resistance | 35mOhm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Supplier Device Package | 10-PowerSO |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | OMNIFET™, VIPower™ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 35mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 83W |
| Base Part Number | VNV28 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 19A |
| Operating Supply Voltage | 18V |
| Interface | On/Off |
| Current - Output (Max) | 19A |
VNV28N04-E Overview
As you can see, it's packaged in the way of a Tube.The PowerSO-10 Exposed Bottom Pad package includes it.Mounting type Surface Mount is selected for the LED driving board.A General Purpose switch type is owned by it.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.There is a default setting of 1 for output.In order to operate, it requires a voltage supply of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.It comes under the family of VNV28.For operation, 10 pins are used.In terms of output, the lighting driver can provide a maximum of 19A V.As a result, the maximum output current is reduced to 19A in order to meet the operation requirements.Surface Mount is mounted in the way.It has 35mOhm resistance.It is included in the OMNIFET?, VIPower? series.The output current is set to 19A in this case.For maximum efficiency, the supply voltage should be set to 18V.For stable operation, the maximum operating temperature is 150°C°C.To ensure reliability, the unit operates at a temperature of -40°C degrees Celsius.There is a maximum current requirement of 250μA for its operation.
VNV28N04-E Features
Resistance of 35mOhm
VNV28N04-E Applications
There are a lot of STMicroelectronics VNV28N04-E Power Switches ICs applications.
- USB Ports/Hubs
- Smartphone and PDA
- Wearable Devices
- Low Voltage I/O System Power
- Hard Disk Drives
- Telecom and Network Systems
- Set-Top Boxes
- Handheld Devices
- Set-top-box
- Smart Phones, Feature Phones
